Mitsubishi L200 Remote Program: Done with SBB2 and VVDI Keytool

Tested successfully! Super SBB2 and VVDI Key tool can program remotes to Mitsubishi L200!

Car: Mitsubishi L200 TRITON >-2011

22

Tools for use:

Super SBB2 key programmer

VVDI Keytool

The test:

In SBB2:

Select a car: China – Select from vehicle – L200 TRITON – > -2011 – Type 1

Start to program remotes

Switch ignition on

The function will erase all remotes

All current remotes are erased

Number of remotes programmed: 0

Press each remote control UNLOCK key for 3 times within 30 seconds

Programming complete

Test the new key programmed

Go to program keys

Security verification failed

In VVDI key tool:

Job’s done!

The car can start with both new keys!

original:Mitsubishi L200 Remote Program: Done with SBB2 and VVDI Keytool

Free Download V4.7.0 VVDI MB Tool Software

V4.7.0 Xhorse VVDI MB BGA Tool  newest software is relaeased on Jan 18th,get the newest software from xhorsevvdi.com, and firmware no need update this time.

vvdi mb tool update

1.Free Download V4.7.0 VVDI MB Tool Software

https://mega.nz/#!ztICEABZ!PMukbM3eqj-5epnUL-LeXsyf28jMLUVlZqaL1wOlfIo

Password:123456

2.V4.7.0 VVDI MB TOOL  update Info(2019-01-18)
Require firmware V4.5.0 

1. This update no need update the firmware

2. Password calculation for ALL KEY LOST: Support W164/W251(-2009), W221 calculate password when all key lost:

a. Support W164/W251(-2009) get key password with slow method (All KEY LOST, 25minutes-1.5hour)

b. Support W221 get key password with VVDIMB Power Adapter (All KEY LOST, no need re-insert IR, 15minutes)

c. Support W221 get key password with slow method (All KEY LOST, 25minutes-1.5hour)

Until now VVDIMB support all key lost EIS type(FBS3):

W166, W197, W212, W218, W246

W172, W204, W207

W216

W164, W251 (-2009)

W164, W251 (2009-)

W169, W209, W211

W202, W208, W210

W203, W463, W639

W639(2009-)

W906

W221

3. Bugfix

Promo 200usd Unlimited Tokens for VVDI MB Tool Password Calculation One Year

[Promo] VVDI MB Tool Free Tokens Till Feb 25th

original:Free Download V4.7.0 VVDI MB Tool Software

TabScan S7 on Megane: read and clear codes successfully!

Tested! TabScan S7 is confirmed to work for French vehicles. Here take Renault Megane (Probado Se confirma que TabScan S7 funciona para vehículos franceses. Aquí toma Renault Megane)

OBD connection (Conexión OBD)

Board status (Estado del tablero)

Diagnoses (Diagnosticos)

Turn on ignition with the key (Turn on ignition with the key)

Euro – Renault (Euro – Renault)

Car type: Megane / Scen (Tipo de carro: Megane/Scen)

Injection (Inyeccion)

Code: EF017

State: Meoria

Description: WATCH INFORMATIÓN – Failo corona volante motor

(Codigo: EF017

Estado: Meoria

Descripcion: INFORMATICION TESTIGO – Failo corona volante motor)

Please turn on, off (Por favor, encender, apagado)

Please turn off and wait 5 seconds (Por favor, apague y espere 5 segundos)

Please, password (Por favor, clave)

Reading the problem code

Please wait…(Leyendo ei codigo deproblemaPor favor espera…)

No problem code (No hay codigo de problema)

Parameters (Parametros)

Reading of the data flow

Please wait…

(Lectura dei flujo de datos

Por favor espera…)

Engine regime (Regimen motor)

Tension oxygen sensor antenrior

(Tension sonda de oxigeno antenrior)

TabScan S7 on Megane: read and clear codes successfully!

How to solve VVDI MB Tool Can Not Find Device Error?

Problem: “vvdi mb can not find device after update software”

VVDI MB Tool newest version is V4.5.0,and after download newest software to run,vvdi mb tool connect with computer with usb cable,and green light is on,but got “error-can’t find VVDI-MB Tool,reconnect VVDI-MB and try again”,just like following pic shows:

vvdi mb tool can not find error

How to solve Can’t Find VVDI-MB Tool error?

1.Please use xhorse update kit software to update firmware and check again.

Please click find device firstly,after computer recognize your device serial number and firmware version,then click upgrade.

If can find device,and update successfully,ususaly it is OK to run vvdi mb software.

2.If after click “Find Device’,still got not found error like following display.

Please download the two driver,run the first one,if not working,try the second driver.

Here is download link :

contact us to get password

Whatsapp:+86-13983756354

Driver 1:

https://mega.nz/#!wS4njRQA

Driver 2:

https://mega.nz/#!MKxlWBiC

If first driver working OK,then continue to do update process.

If first driver get error,like this

vvdi mb tool can not find error

Run Second Driver

If second driver got the error,please click change setting,then choose “automatic…”one,and try run second driver.exe again.Then it will be OK.

vvdi mb tool can not find error

After install driver successfully,find device is OK,and click upgrade.

vvdi mb tool

Please confirm the update process succeed.If failed,please try again update.Then test vvdi mb tool software is working OK.

vvdi mb tool can not find error

VVDI MB Tool Password calculation one year unlimited tokens 380USD,we activate online in 1-2 hours when we are on work

vvdi mb tool software

Here we attach newest V4.5.0 VVDI MB Tool software and Xhorse update kit software download link:

VVDI Benz Latest Version:V4.5.0

Free Download V4.5.0 VVDI Benz Software [Password:123456]

Xhorse Upgrade Kit Software[Please close your anti-virus software,as it contact .exe application,may recognise as virus.It is clean to use.]

original:How to solve VVDI MB Tool Can Not Find Device Error?