CGDI BMW Reset BMW FEM/ BDC Odometer 95256

This post is available with how to use CGDI BMW to reset mileage for BMW FEM/BDC Anti-theft module.

The raw car mileage is 101024 KM

The position of BDC anti-theft box is in the co- pilot position

BDC appearance style

There is 95256 chips on the BDC module, which will be used during operaion

Connect the BDC module to the platform and follow the software prompts

Open CGDI BMW software

Select BMW key Match (OBD)-> FEM/BDC Key Match

Click “ view help”

It prompts “The current FEM/BDC needs to update the ECU program before performing key matching. Please ensure that the car battery has enough power, please keep the equipment cable connection during the programming. Whether to continue?”

Click “yes”

Select the second way to read EEPROM “

Use EEPROM adapter to read FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”

Create a new folder to save the EEPROM data read out

Install the FEM/ BDC into the car(the chip holder must be removed from the chip) and click the “next” button

Programming ECU…

Select the second way to write EEPROM

Use EEPROM adapter to write FEM/BDC 8-Pin chip data: Please remove the FEM/BDC from the car (must cut off power), and properly connect the adapters’ chip clip to the 95128/95256 chip of the FEM/BDC, then click the “Next” button”